When you clean your bathroom, in addition to cleaning the sanitary ware you use daily, the floor and even the walls, it is also important to clean the shower or bath screen that protects from splashes and spills of water when you shower or bathe.
How can I clean the bathroom screen?
The bathroom screen is an element that, in addition to fulfilling the mission of preventing water from spilling out of the shower or bathtub when you are showering, has a decorative function since it can be the brightest element in the bathroom and sometimes the protagonist. But this element can lose all its charm if it is not completely clean becausecan collect dirt very easily.
After each shower, they arelime residue found in the water,soap residue and other chemicals or evenmold that gradually stick to the surface giving it a dull and neglected appearance.
If your bathroom has a window, you will likely leave it open a few minutes after taking a shower so that theexcess moisture evaporate. If you are not so lucky to have a window in this room of the house, you should dry the screen every day after wetting it to prevent the stains that we have mentioned from remaining.
In both cases, it is most likely thatyour screen needs to be cleaned frequently, and although you can find specific products to clean it, today I am going to tell you how you can do it withwater and vinegar, so that with little effort, it is impeccable.
Clean your screen with water and vinegar
If your screen is made of glass, the easiest way to clean it is water and white vinegar, preferably the cleaning one, since you will getdescale the lime at the same time that you will clean it properly.
What I need?
- 1 spray bottle.
- 1/2 cup of vinegar.
- 1/2 cup of water
- 1 spray bottle.
- 1 sponge.
- 1 cotton lint-free cloth.
- 1 rubber scraper or spatula.
That I have to do?
First, you have to mix in the spray bottlewater and vinegar in equal parts.
Next, you have to spray the part inside the screen well, which is the one that usually stains the most, with this solution, and leave it to act for about five minutes.
Then take the sponge and rub the solution well to remove the lime and soap residues that remain adhered to the glass.
If your screen has sliding doors,don't forget the lane, since that is where more dirt and lime can accumulate because it is not a surface that is sometimes so accessible. Perhaps in this case, after applying the water with the vinegar with the sprayer, you can help yourself with a toothbrush that you no longer use to rub that area well and leave it very clean.
When you have already suitably rubbed the entire surface andwell removed the traces of lime or moldYou can rinse with the shower tap and then pass the dry cloth to dry well or the rubber scraper from top to bottom to remove excess water, whichever you prefer.
For the outside of the screen, just spray the water and vinegar solution and then rub with a dry, lint-free cotton cloth. In this case, as it will not have so much lime residue, it usually works well with this step alone, without the need to rinse with the shower tap.
Remember that if your screen has aluminum or steel finishes, be careful to do a small test on a non-visible part of these parts before cleaning all that surface, in case they deteriorate with this solution.
With information from: https://misremedios.com/